James Hardie Staggered Shake Siding Installation Instructions

First you ll want to start at one end and work across the wall.

James hardie staggered shake siding installation instructions.

During installation over the course of the project. Be sure to align the bottom edges of trim and siding for best appearance. Then install a 1 1 4 inch starter strip and an 8 1 4 inch starter course. Installing siding wet or saturated may result in shrinkage at butt.

Store flat and keep dry prior to installation. James hardie building products provides installation wind load information for buildings with a maximum mean roof height of 85 feet. We have dozens of installation specialists throughout the u s. For information on installations above 60 feet please contact jh technical support.

Avoid breathing silica dust james hardie products contain respirable crystalline silica which is known to the state of california to cause cancer and is considered by iarc and niosh to be a cause of cancer from some occupational sources. James hardie recommends the use of building paper type weather resistive barriers with all siding products. Do not use stain oil alkyd base paint or powder coating on james hardie products. Installation requirements primed colorplus products hs11121 p1 5 6 13 warning.

Contact your james hardie sales and install representative for product support 1 800 9hardie 1 800 942 7343. When in doubt about assembly details contact the architect speciier or a building oficial. Breathing excessive amounts of respirable silica dust can also cause a. As a homeowner you will work with a contractor who will facilitate the installation of your james hardie siding trim soffit wrap and flashing products including products with colorplus technology.

And canada who are available to work with any contractor or builder. Remember a 1 4 inch clearance must be maintained between siding and trim and leave a 1 8 inch gap between siding and trim. Preparation ensure the drainage plane is intact and all penetrations are sealed. James hardie will assume no responsibility for water infiltration within the wall.

We have dozens of installation specialists throughout the u s. For additional information on. As a homeowner you will work with a contractor who will facilitate the installation of your james hardie siding trim soffit wrap and flashing products including products with colorplus technology.